A while back I changed the strings on my Kala baritone. It never buzzed before, but it sure does now. I’m kind of baffled as to what could be causing it, but I do know that when I changed the strings, the saddle fell out on the floor. It was in there very loosely. So I’m wondering if it’s possible that I put the saddle back in the wrong way around. The B & E strings are taking turns buzzing, especially around the first three frets. I guess the other possibility is that the new strings are sinking too far down into the slots on the head stock. I did watch your video Matt on uke maintenance, but I hesitate to start messing with either the nut or the saddle. Do you think the buzzing would stop if I just changed to a different brand of strings?
top of page
bottom of page
The saddle could be in the wrong way around. If it is compensated (not straight) the third string (G on baritone) should be the furthest back.
Changing strings can cause buzzing. If the nut slots aren’t perfect a thinner string may move about in the slot. You may also find lower tension strings are more likely to cause fret buzz.
Try to see if you can isolate the buzz. Is it just certain strings? Does it happen only in open position or when you play certain frets?